Antminer D3 in Stock

$130.00

Description

1. Specifications and other information of the Antminer D3 are as mentioned below.

2. Please select the correct address for shipping before you submit your order because, for this batch, the shipping address cannot be changed after the order has been submitted.

3.The shipping for this batch will start on a first-order-first-ship basis in  March 2018 for orders that antminers9 has received full payment for. We advise you to research and prepare in advance for the customs’ clearance in your country to avoid delays or unexpected costs.

5. You will need an ATX PSU with at least 10 six-pin PCIe connectors. There are 3 six-pin PCIe connectors on each hashing board and all three need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. antminers9 recommends the APW3++ to power the D3.

6. Separate power supply to control board: there is one additional six-pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10 PCIe connectors are connected to a power supply.

Parameters of ANTMINER D3

No.

Parameters

Value

1

Product model

D3

2

Hash ASIC type

BM1760

4

Total quantity of hash chips

180 chips

5

Total quantity of hash boards

3 boards per miner

6

Total hash rate

17GH/s±5%

7

DC voltage input

11.60~13.00 V

8

DC current input @12V DC

 75.2A +5%

9

DC Power @12V DC input

 902W +7%

10 220VAC Power @25℃ ,93%

conversion efficiency of APW3

970 W +7%

11 220VAC Power efficiency @25℃,93% conversion efficiency of APW3 57mJ/MH+7%
12

Weight(without package)

 4.2 kg

13

Operation temperature

0-40 ℃

14

Storage temperature

-40-85 ℃

15

Operation humidity

5%RH-95%RH,

prevent condensation

16

Noise

76 dB

17

Networking connection mode

Ethernet Cable

18

Power connection mode

All three PCI-E ports are required to power the board. You can use one PSU to power multiple boards, but do not attempt to power one board with two PSUs.We suggest to prevent the control board to be powered up before hash boards be powered up.

19

Size(Length*Width*Hight,without package)

320mm*130mm*190mm

Payment

1. BTC(Bitcoin) and USD wire are accepted in this batch.

For BTC payment method, please use the exact amount mentioned in your order and complete the payment within one hour. After one hour, the order will expire and your payment may not be detected by the system automatically. Payment must be in BTC. We cannot accept payment in BCH. If you send BCH to the BTC wallet the coins may be lost. If the payment is submitted but the receipt is delayed, we will make your payment “Valid” manually.

For USD wire, please upload the bank proof of transfer within 3 days. If no proof of transfer is loaded, the order will be expired.

2. The shipping cost, customs charges, and taxes (if any) are not included in the retail price shown above.

3. Please fill your desired quantity, shipping address and select your preferred shipping service while placing an order to learn the shipping cost to your shipping address.

4. Special Provision: After an order has been submitted, a request to cancel the order, refund any part of the ordered amount or change the ordered item(s) to different items(s) or different batch(es) will not be entertained by www.antminers9.com.au. We advise you to make any purchase only after deliberation.

5. To get a fast response from our team for any order or sales related inquiries please submit a request here.

6. The unit price and total price of the products, the amount paid by you shall be all denominated in U.S. dollars, no matter what currency you uses to make payment . The exchange rate between U.S. dollars and cryptocurrency shall be adopted following the below rules:

• In the event that you pay for your placed Order which is valid and has not been fully paid yet, the exchange rate between U.S. dollars and cryptocurrency fixed in such placed Order shall be adopted;

• Otherwise, the real time exchange rate between U.S. dollars and cryptocurrency displayed on the Site upon payment shall be adopted.

Please do not place your order with anyone or anybody claiming to be an official antminers9 representative over email or Skype. It can be a scam and your confirmed order may never be delivered in such cases. antminers9 is neither responsible for nor offers any kind of compensation in such cases.

NOTE: The price of cryptocurrency mining machines has to be adjusted frequently in accordance with variables like the exchange rate of the cryptocurrency with fiat, the cryptocurrency’s network difficulty, or the expected difficulty increase. Refund requests based on price changes cannot be honored.

Warranty

1. A 180-day warranty is provided starting from the shipping date. To avail this warranty a repair ticket must be generated by the customer on antminers9’s website. Overclocking the miner will void the warranty immediately.

2. The warranty only applies to the original purchaser who purchased the machine directly from www.antminers9.com.au. Once the miner is resold warranty coverage becomes the responsibility of the re-seller.

3. All sales are final. No refunds will be granted. Defective miners can be repaired for free if they fall under the antminers9 warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.

4. The following events will void the warranty:

a. Customer removes/replaces any components by himself without receiving permission from Bitmain first;

b. Damage caused by poor power supply, lightning or voltage surges;

c. Burnt parts on hash boards or chips;

d. Miner/boards/components damage due to water immersion or corrosion due to wet environment.

5. For all repairs or RMA, within warranty or not, customer must return the defective parts at his/her own expense after opening a support ticket and troubleshooting with antminers9’s instructions.

6. Antminers9 will cover shipping cost when shipping a replacement unit within the warranty period.

7. If you notice there are some loose heatsinks when you receive the miner, please inform us by email to [email protected] within 3 days from the date the package is received according to UPS/DHL/FedEx’s website.

8. antminers9 does not take any responsibility for or compensate for any loss as result of downtime caused by delays in transportation as a result of customs formalities or other reasons.

Please read antminers9’s Terms & Conditions for a complete list of conditions and terms that apply to all orders placed on www.antminers9.com.au

Discount

There are no discounts available for this batch.